添加 Kconfig 样例，添加基础的板及配置

2025-02-20 12:55:19 +08:00
parent 6e18d7a3d7
commit 73df531ac3
10 changed files with 124 additions and 172 deletions
--- a/app/config/board_config/devkit_esp32c3.h
+++ b/app/config/board_config/devkit_esp32c3.h
@@ -3,10 +3,6 @@
 #define CONFIG_IDF_TARGET "esp32c3" /* 警告：请使用命令 idf.py set-target <参数> 选择对应的平台 */

 static cfg_board_t const s_cfg_board_default = {
-    .firmware_str = PRODUCT_TYPE,
-    .platform_str = CONFIG_IDF_TARGET,
-    .board_name = "devkit_esp32c3",
-
    /* 控制台串口 */
    .uart_console = {
        .pin_txd = {43, _GPIO_DIR_OUT, _GPIO_PUD_PULL_UP},
@@ -16,20 +12,6 @@ static cfg_board_t const s_cfg_board_default = {
        .br = 115200,
    },

-    /* 数据透传串口 */
-    .uart_fc = {
-        .pin_txd = {7, _GPIO_DIR_OUT, _GPIO_PUD_PULL_UP},
-        .pin_rxd = {6, _GPIO_DIR_IN, _GPIO_PUD_PULL_UP},
-        .id = UART_NUM_1,
-        .irq_prior = 24,
-        .br = 115200,
-    },
-
-    .led_spi = {
-        .spi_id = SPI2_HOST, // 模拟 PWM 用的 SPI
-        .pin = 10,           // 模拟 PWM 输出引脚
-    },
-
    /* 启动按键 */
    .key_boot = {
        .pin = 9,    // 用于切换灯效