参考代码

2024-03-28 12:19:52 +08:00
commit 7b86aa3362
96 changed files with 19986 additions and 0 deletions
--- a/app/config/board_config/devkit_esp32c3.h
+++ b/app/config/board_config/devkit_esp32c3.h
@@ -0,0 +1,40 @@
+#if (CONFIG_BOARD_NAME_DEVKIT_ESP32C3)
+
+#define CONFIG_IDF_TARGET "esp32c3" /* 警告：请使用命令 idf.py set-target <参数> 选择对应的平台 */
+
+static cfg_board_t const s_cfg_board_default = {
+    .firmware_str = PRODUCT_TYPE,
+    .platform_str = CONFIG_IDF_TARGET,
+    .board_name = "devkit_esp32c3",
+
+    /* 控制台串口 */
+    .uart_console = {
+        .pin_txd = {43, _GPIO_DIR_OUT, _GPIO_PUD_PULL_UP},
+        .pin_rxd = {44, _GPIO_DIR_IN, _GPIO_PUD_PULL_UP},
+        .id = UART_NUM_0,
+        .irq_prior = 0,
+        .br = 115200,
+    },
+
+    /* 数据透传串口 */
+    .uart_fc = {
+        .pin_txd = {7, _GPIO_DIR_OUT, _GPIO_PUD_PULL_UP},
+        .pin_rxd = {6, _GPIO_DIR_IN, _GPIO_PUD_PULL_UP},
+        .id = UART_NUM_1,
+        .irq_prior = 24,
+        .br = 115200,
+    },
+
+    .led_spi = {
+        .spi_id = SPI2_HOST, // 模拟 PWM 用的 SPI
+        .pin = 10,           // 模拟 PWM 输出引脚
+    },
+
+    /* 启动按键 */
+    .key_boot = {
+        .pin = 9,    // 用于切换灯效
+        .en_lev = 0, // 用于切换灯效
+    },
+};
+
+#endif