参考代码

app/config/board_config.c

@@ -0,0 +1,27 @@
+#include "board_config.h"
+
+#include "driver/uart.h"
+
+#define CONFIG_SYS_LOG_LEVEL SYS_LOG_LEVEL_DBG
+#define SYS_LOG_DOMAIN "CFG"
+#define CONS_ABORT()
+#include "sys_log.h"
+
+static cfg_board_t const s_cfg_board_default = {
+    /* 控制台串口 */
+    .uart_console = {
+        .pin_txd = {43, _GPIO_DIR_OUT, _GPIO_PUD_PULL_UP},
+        .pin_rxd = {44, _GPIO_DIR_IN, _GPIO_PUD_PULL_UP},
+        .id = UART_NUM_0,
+        .irq_prior = 0,
+        .br = 115200,
+    },
+
+    /* 启动按键 */
+    .key_boot = {
+        .pin = 9,    // 用于切换灯效
+        .en_lev = 0, // 用于切换灯效
+    },
+};
+
+const cfg_board_t *g_cfg_board = &s_cfg_board_default;